Minelab Gold Monster 1000 Gold Detector
The GOLD MONSTER 1000 features fully automatic operation and comes with a choice of coils, battery options and shaft configurations. If you’re looking for super sensitive gold performance at a great price, then this is the detector you’ve been waiting for!
- Fully automatic operation
- Extra sensitive 45 kHz VLF performance
- Highly adaptable
- 2 search coils included
- Easy quick start
Gold Chance Indicator
High Gold Chance
Low Gold Chance
Gold (Iron Reject)
|Manual sensitivity, and two
auto options; Auto, and Auto+.
|Adjust to suit your hearing, with 6
Wide ground coverage
Confined space detecting
Universal shaft adaptability
Waterproof coil (to 1m/3′)/ Rain proof control box
GOLD MONSTER 1000 outperforms all other single frequency VLF gold detectors!
*Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.
Up until now, there has always been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.
When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery!
Automatic noise cancel • Digital electronics • Auto ground balance • Faster processor • Automatic sensitivity
- Control Box
- 10″ x 6″ Double-D Coil
- 5″ Double-D Coil
- Headphones (3.5mm/1/8″)
- Collapsible Shafts
- AC Charger
- Car Battery Cable
- Rechargeable Li-Ion Battery
- Replaceable AA Battery Carrier
- Getting Started Guides
- Universal Shaft Adapter
- Digging Tool
Pro Gold Panning Kit
15-inch Dual Riffle Pan
The 15-inch pan features three separate panning zones. A versatile combination of 90° riffles, mini riffles, and flat sidewall allow efficient recovery of all of the gold using multiple panning techniques.
10-inch Single Riffle Pan
The 10-inch pan has the large 90° riffles and flat sidewall. It’s great for panning lighter loads and suitable for beginners and children.
Remove large rocks with the classifier by sifting the coarse aggregate materials into the gold pan. It’s sized perfectly to fit on top of a standard 5 gal. (20 L) bucket, and the two handles make it comfortable to use.
Convertible Carry Bag
The handy lightweight carry bag will help you keep everything in one place. Using the pull-strings, it converts to a backpack for easy kit transportation.
Also Included in This Kit:
• Iron-Separator Magnet
• Double-Loupe Magnifier (3×, 5× magnification)
• Vacuum Suction Bottle
• Gold Transfer Pipette
• Micro-Gold Storage Vials
• Getting Started Guide
Pro Find 35 Pinpointer
PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time
Ferrous Tone ID
Two different responses help you to identify ferrous junk from nonferrous treasure. Great to use with non-discriminating detectors.
Waterproof to 3 m (10-ft)
Rugged waterproof design ideal for beach and river pinpointing. The perfect companion for a waterproof detector.
Audio & vibration indication
Audio tones and vibration intensify as the probe approaches the target making target recovery easier, especially underwater!
Five sensitivity levels allow you to precisely adjust for maximum depth and minimum noise in all ground conditions. Easily adjustable with separate +/– buttons
High visibility – with lost-alarm
The PRO-FIND’s bright yellow handgrip is clearly visible for easy location, so you won’t leave it behind after you dig. Quickly locate your forgotten pinpointer with the handy lost-alarm.
Holster & lanyard included
A lanyard and a tough, semi-rigid holster that attaches to any belt will keep your PRO-FIND at the ready
PRO-FIND 35 Includes:
PRO-FIND 35 pinpointer
9V PP3 battery