WIRELESS TEMPERATURE SENSOR WITH EXTERNAL PROBE

$143.00

When it isn’t convenient to measure temperature with a full size sensor, the Wireless Sensor with External Temperature Probe is for you. Place the sensor somewhere convenient, and then use the included probe to measure temperature inside of your products, or in more convenient locations.

Description

Additional Information:

Wireless Tag (003)

Wireless Temperature Logger IT Information (003)

When it isn’t convenient to measure temperature with a full size sensor, the Wireless Sensor with External Temperature Probe is for you. Place the sensor somewhere convenient, and then use the included probe to measure temperature inside of your products, or in more convenient locations.

These are the Wireless Reed Switches with an external 1m probe installed. The tip is a 3cm stainless steel probe.
These are sensors only and not loggers. If they are out of range of the Tag Manager they will NOT store readings.

Features:

  • Programmable sample rate
  • Wireless connectivity
  • Get alarms and notifications when the temperature falls out of your desired range*.
  • iOS and Android app available for easy setup and notifications.
  • Long battery life.
  • -30°C to 80°C temperature range.

* NOTE: when the sensor is out of range of the Wireless Ethernet Base, no data will be recorded and you won’t receive any alarm notifications. If you would like to still record temperatures even when connectivity has been lost, have a look at the Wireless Temperature Logger.

How It Works

Step 1: Temperature Sensor

The temperature sensor is a tiny device that can detect temperature and humidity. When it takes a recording, it sends the results along to the Wireless
Ethernet Base.

Step 2: Wireless Ethernet Base

The Wireless Ethernet Base connects up to 50 sensors, and is the gateway between the sensor and the rest of the internet, which is where it sends the data for storage.

Step 3: Mobile App

The iOS and Android apps talks to the server and gives you alarms, reports and graphs all based on the temperature and humidity from your sensors.

Features

100m Range

Communicate up to 100m from temperature logger to your Wireless Ethernet Base

Universal Access

Access current temperatures from any internet enabled device

Automatic Notifications

Get customisable, automatic notifications sent to your phone or email

Easy Setup

The Wireless Ethernet Base easily plugs into your existing network.

Free App

Get our free iOS and Android apps to monitor temperature on the go.

Specifications

  • Battery Type: CR2032 x1 (replaceable)
  • Battery Life: 2 to 85 months depending on usage and response delay settings
  • Range: up to 100m line of sight
  • Frequency: 433MHz
  • Operation range: -40°C (-40°F) to 85°C (185°F)
  • Accuracy: +/-0.4°C max
  • Resolution: 0.02°C
  • Relative Humidity: +/-2% RH error, 10-bit resolution (0.12% step)
  • Height: 15.4mm
  • Width: 27.6mm
  • Length: 68.6mm
  • Weight: 15g
NOTE: This product requires a Wireless Ethernet Base to be able to operate.