CAN BUS INTERFACE (SPEEDO/TACHO SIGNAL) HMCAN001
$620.00
The CB-1 CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from virtually any vehicle using a CAN Bus system.
Description
Additional information – HMCAN001 Data Sheet
The CB-1 is now compatible with over 40 vehicle makes covering 300+ different models, including commercial vehicles using SAEJ1939.
Features built-in diagnostic LEDs to indicate CAN Bus status.
Applications:
- Navigation systems
- Taximeters
- Cruise Control
- Fleet Management
- Parking Sensors
- Speed limiters
Electrical Characteristics
| Output voltage | 12V square wave |
| Minimum speed | 1.7mph / 2.7kph |
| Approx. pulses | 3600ppm / 2237ppk |
Interface Specifications
| Colour | Function |
|---|---|
| Black | Ground |
| Red | +12V |
| Yellow | CAN High |
| Blue | CAN Low |
| Orange | Speed Pulse Output 12V |
Physical Characteristics
| Width: | 31mm |
| Length: | 53mm |
| Height: | 10mm |
| Wire Length: | 270mm |
The CB-1 CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from virtually any vehicle using a CAN Bus system.
The CB-1 is now compatible with over 40 vehicle makes covering 300+ different models, including commercial vehicles using SAEJ1939.
Features built-in diagnostic LEDs to indicate CAN Bus status.
Applications:
- Navigation systems
- Taximeters
- Cruise Control
- Fleet Management
- Parking Sensors
- Speed limiters
Electrical Characteristics
| Output voltage | 12V square wave |
| Minimum speed | 1.7mph / 2.7kph |
| Approx. pulses | 3600ppm / 2237ppk |
Interface Specifications
| Colour | Function |
|---|---|
| Black | Ground |
| Red | +12V |
| Yellow | CAN High |
| Blue | CAN Low |
| Orange | Speed Pulse Output 12V |
Physical Characteristics
| Width: | 31mm |
| Length: | 53mm |
| Height: | 10mm |
| Wire Length: | 270mm |
