LUTRON CA502CLAMP ADAPTOR – DCA/ACA 0-1000A
Clamp meter with a wide measuring range
Additional information – CA502
0 to 1,000 ACA,
2 ranges ( 200 ACA, 1,000 ACA ).
0 to 1,000 DCA,
2 ranges ( 200 DCA, 1,000 DCA ).
ACA 1 AC mV per 1 ACA.
DCA 1 DC mV per 1 DCA.
200 A ( 1.5 % + 1 AC mV )
1,000 A ( 2 % + 0.5 AC mV )
200 A ( 1.5 % + 1 DC mV )
1,000 A ( 2 % + 0.5 DC mV )
Frequency Response: ACA frequency response is from 40 to 400 Hz, specification be tested on sine wave 50/60 Hz.
Sensor: Hall effect sensor.
DCA Zero Adjustment: External knob, adj. limited within approx. ( 30 to 50 DCA ).
Safety Standard: Meet IEC 1010.
Battery: 006P, MN1604 ( PP3 ) DC 9V battery or equivalent, recommend use the alkaline or heavy duty battery.
Power Consumption: Approx. 15 mA.
Operating Temperature: 0°C to 50°C
Operating Humidity: Less than 80% RH.
Dimension: Meter 190 x 64 x 33 mm )
Jaw 78 mm – outside.
Weight: 345 g ( with battery ).
Accessories Included: Operation manual.
* To match ACV 200 mV or 2V range of Digital Multimeter or Volt meter be used as a precision ACA Clamp Meter.
* To match DCV 200 mV or 2V range of Digital Multimeter or Volt meter be used as a precision DCA Clamp Meter.
* DCA, ACA recorder, controller, indicator.