TRAMEX WATER DAMAGE RESTORATION MASTER KIT

$4,670.00

Description

Additional Information – Tramex_Water_Damage_Restoration_Master_Kit_us

The ultimate Tramex kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Tramex MEP moisture meter for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Tramex CMEX II digital concrete moisture meter allows for testing per ASTM F2659 and the reusable Hygro-i ® probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170 (or Hood Method with optional Hood) for relative humidity readings in concrete slabs. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Hygro-i ® probe. A heavy-duty pin-probes measures Moisture Content in wood. The Water Damage Restoration Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.

Features of the CMEX II

  • Measures up to 6.9% Moisture Content in Concrete.
  • Hold function “freezes” meter reading when inspecting areas where the meter face is not visible.
  • Attaches to a relative humidity Hygro-i ® probe for in situ testing of concrete and ambient conditions.
  • 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment.

Features of the MEP

  • Wide range of readings for wood from 5% to 30%
  • Deep signal penetration up to 1¼” (30mm) into the materials being tested without the need to damage the surface.
  • Three ranges of sensitivity: Wood, Timber / Drywall, Roofing / Plaster, Brick – making it ideal for testing various building materials.

Warranty

All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship. Proof of purchase is necessary.

Contents

  • CMEX2 Non-destructive, digital concrete moisture meter.
  • MEP Non-destructive analog moisture meter for general building materials.
  • 3 Hygro-i ® RH probes and connector cable with ASTM F2170 tools.
  • IRTX Infrared surface thermometer.
  • HH14TP30 Heavy duty pin-type probe for wood.
  • HA21SP52 Heavy duty hammer pin-type probe for wood.
  • SP200 Long insulated pins for deep wall inspection.
  • 8 Hole liners to perform concrete floor RH testing to ASTM F2170.
  • SAL75 Calibration check salts.
  • Heavy duty carry case.

Specifications

Industry
::: Water Damage Restoration.
Material
::: Concrete Slabs & Screeds, Anhydrite/Gypsum Screeds & Boards.Drywall, wood, plaster, brick, ceramic, porcelain tiles, resilient flooring, laminates, asphalt composition shingles and most building materials.
Technical Data
Weight: 9.72lbs (4.4kg)
Size 16.9″ x 13.6″ x 5.1″ (430mm x 345mm x 130mm)
Power 9 Volt PP3 Battery x 3 (included)
Display MEP Analogue. CMEX2 Digital/Backlit.
Depth of penetration NDT CME4 approx. ¾” (20 mm). NDT MEP 1¼ ” ( 30 mm ).
Measuring Range
Moisture content of concrete 0 to 6.9 % (moisture by weight)
Gypsum Scale 0 to 10 (comparative)
Reference Scale for Building Materials 0 to 100 (comparative)
Moisture content of wood Pin-type Probe 7-40%. NDT MEP 5-55%.
Relative Humidity 0 to 99%