CAN BUS INTERFACE (SPEEDO/TACHO SIGNAL) HMCAN001

$357.01

The CB-1 CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from virtually any vehicle using a CAN Bus system.

SKU: HMCAN001 Categories: ,

Additional information – HMCAN001 Data Sheet

The CB-1 is now compatible with over 40 vehicle makes covering 300+ different models, including commercial vehicles using SAEJ1939.

Features built-in diagnostic LEDs to indicate CAN Bus status.
Applications:

  • Navigation systems
  • Taximeters
  • Cruise Control
  • Fleet Management
  • Parking Sensors
  • Speed limiters

Electrical Characteristics

Output voltage 12V square wave
Minimum speed 1.7mph / 2.7kph
Approx. pulses 3600ppm / 2237ppk

Interface Specifications

Colour Function
Black Ground
Red +12V
Yellow CAN High
Blue CAN Low
Orange Speed Pulse Output 12V

Physical Characteristics

Width: 31mm
Length: 53mm
Height: 10mm
Wire Length: 270mm

The CB-1 CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from virtually any vehicle using a CAN Bus system.

The CB-1 is now compatible with over 40 vehicle makes covering 300+ different models, including commercial vehicles using SAEJ1939.

Features built-in diagnostic LEDs to indicate CAN Bus status.
Applications:

  • Navigation systems
  • Taximeters
  • Cruise Control
  • Fleet Management
  • Parking Sensors
  • Speed limiters

Electrical Characteristics

Output voltage 12V square wave
Minimum speed 1.7mph / 2.7kph
Approx. pulses 3600ppm / 2237ppk

Interface Specifications

Colour Function
Black Ground
Red +12V
Yellow CAN High
Blue CAN Low
Orange Speed Pulse Output 12V

Physical Characteristics

Width: 31mm
Length: 53mm
Height: 10mm
Wire Length: 270mm