HUMMINGBIRD PANEL MOUNT CABIN PRESSURE MONITOR HMPS3000KIT

$1,067.00

The Hummingbird Panel Mount Cabin Pressure Monitor provides a highly visual readout to operators, letting them know when the cabin pressure drops below a critical level.

SKU: HMPS3000KIT Categories: ,

Description

Hummingbird Electronics’ Cab Pressure Monitors provide a visual display to operators, letting them know when positive pressure in the cab is too low or too high. Low pressure in the cab can result in dust and other harmful materials entering the cab. High pressure can result in fatigue and headaches. The cab pressure monitor has been engineered for simple installation and operation.

The Cab Pressure Monitor measures pressure in the cab and compares it with atmospheric pressure. When the pressure in the cab drops to a level that is not high enough to prevent dust and other materials entering the cab, the display turns orange to alert the operator. After a user configurable number of seconds of the pressure being low or high, the display turns red, a warning is shown and the external outputs are triggered.

Powerfull Performance
The pressure measurement units and thresholds can be configured via a touch-screen. The touch-screen must be accessed within 10 seconds of power being applied after which it is disabled. The touch-screen also allows other features such as screen brightness, password and outputs to be configured.

A precision sensor allows pressure to measured to a resolution of 0.1mm H20. Measured pressure is temperature compensated to allow operation over a wide range of temperatures. An extremely high sensor burst pressure of 5000Pa means that door slams will not affect the sensor.

Push fittings allow for quick installation of the tube to the outside. A spare bulkhead push fitting is provided to enable sealed entry through the vehicle fire-wall if required. A filter is supplied to keep the air provided to the sensor as clean as possible.

Features
• Highly visible colour display
• Under and over-pressure warning
• Installer settable threshold
• Real-time pressure readout
• External output
• 12/24V operation
• Includes all fittings required
• Panel mounted

Device Type Configurable Cab Pressure Monitor
Operating Pressure Range 0-500Pa ( 0-50MM H2O )
Sensor Resolution 1Pa (0.1mm H2O)
Sensor Burst Pressure 5000Pa
Operating Temperature 0°-50°C
Input Voltage Minimum 9V; Maximum 36V
Current Consumption <2W (100mA at 12V, 50mA at 24V)
External Output – Inactive State High impedance (Open collector) (Grounded)
External Output – Maximum Sink Current 120mA
Tube Specification HE-CON068 – Plastic tubing PUN-H-3X0,5-NT (2 Meter)
Analog Output Range 0-10V, maximum 10mA output current
Voltage Output Low value 0V, High value 9V, maximum output current 10mA
Weight (g) 207
Height (mm) 76
Length (mm) 77
Width (mm) 90
Warranty 1 Year

 

6569 HMPS1000KIT Cabin Pressure Monitor brochure (Aust Made) 200403 digital – Copy 1

You may also like…